Published on Jun 05, 2023
LRR- LINE REFLECT REFLECT is a new self-calibration procedure for the calibration of vector network analyzers (VNA). VNA measure the complex transmission and reflection characteristics of microwave devices. The analyzers have to be calibrated in order to elimi : Seminar Report, PDF, PPTnate systematic errors from the measurement results.
The LRR calibration circuits consist of partly unknown standards, where L symbolizes a line element and R represents a symmetrical reflection standard. The calibration circuits are all of equal mechanical length. The obstacle, a symmetrical-reciprocal network is placed at three consecutive positions. The network consists of reflections, which might show a transmission. The calibration structures can be realized very easily as etched structures in microstrip technology.
During the calibration [G], [H], which represents the systematic errors of the VNA is eliminated in order to determine the unknown line and obstacle parameters.
MICROWAVE DEVICES
Microwave devices are devices operating with a signal frequency range of 1-300GHz. A microwave circuit ordinarily consists of several microwave devices connected in some way to achieve the desired transmission of a microwave signal.
The various microwave solid state devices are,
* Tunnel diodes
These are also known as Esaki diodes. It is a specially made PN junction device which exhibits negative resistance over part of the forward bias characteristic. Both the P and the N regions are heavily doped. The tunneling effect is a majority carrier effect and is very fast.
It is useful for oscillation and amplification purposes. Because of the thin junction and shot transit time, it is useful for microwave applications in fast switching circuits.
